EMERGE Project


Advanced Measurement Framework for Emerging Electric Power Systems


EMERGE is a three-year Exploratory Research Project funded by the Romanian Ministry of Education and Research, CNCS – UEFISCDI within PNCDI III.

EMERGE at a glance

Type of action: Exploratory Research
Grant Number: PCE-2020-2876
Start Date: 04/01/2021
End date: 31/12/2023
Project Coordinator: UPB


EMERGE aims to define and validate a new measurement framework for emerging power systems and its validation for selected measurands, Derivation of prosumers load curves and embedding 2Q load models


The project addresses how to accurately extract information in non-stationary power signals from measurements delivering a measurement result and the associated metrological quality (called from now on, 2M paradigm). The measurand (e.g. frequency of a voltage signal) is represented by a parameter in an a-priori accepted model (periodical, quasi-sinusoidal voltage waveform).


Main objective of EMERGE is to define and validate a new measurement framework for emerging power systems and its validation for selected measurands: frequency, rate of change of frequency, voltage and current phasors, active power in at least two scenarios defined by the phenomena dynamics (and reflected in the selected reporting rate if the measurements and associated steady state flagging concept).


The impact of EMERGE can be seen as three-folded:

  • (i) scientifically, following the 4M paradigm, an easier transition to the future sampled-values-waveform measurements and information retrieval will be enabled.
  • (ii) economically, by an adapted control to the fast changes of systems with low inertial response: a methodology able to use highly time-granulated load demand and/or generation profiling (below 15 minute) of prosumers and their optimal temporal and spatial mapping with possible services to be offered in local electricity markets.
  • (iii) environmental and societal, by pursuing the Green Deal [1] objectives of “supplying clean, affordable and secure energy” through the development of smart infrastructure building blocks for future energy systems


The project will develop around the core issue in power system control, i.e. definition of the measurand for most used parameters in electric power system control: frequency; rate of change of frequency voltage and current phasors, voltage and current symmetrical components (in various coordinates- symmetrical components, alfa-beta, d-q), active power. The best choice of parameters to be used as descriptor for the (quasi-) steady state versus dynamic state, the required measurement setup and quality to issue the “steady state signal” will be analyzed.